Opening the Control Head on the Neco NM 692 Autopilot

[IWanda]

As we continue to trouble shoot the current problem with our Neco we would like to examine connections inside the control head, however our best efforts using gentile persuasion have not opened the case/box. Have any of you accomplished this, and is there a trick we need to use? We realize this may be part of the autopsy.

Thanks! Mary & Christian / I Wanda

[Ronar M]

Hi

I have gained access to the electrical connections on my Neco auto pilot – I needed to adjust the limit switches. Beside the sink there is a deep locker with lid in the formica worktop. You need to measure very carefully and then drill a large hole through the bulkhead (about 10 cm in diameter). Then you can take the cover off the Neco’s electrics through this hole. A good lead light and a mirror are a must have.

Good luck, Trevor

[Author]

Posts