Beaching Legs

Home Forums Other Uncategorized Beaching Legs

This topic contains 7 replies, has 2 voices, and was last updated by  Conche 4 years, 3 months ago.

Viewing 8 posts - 1 through 8 (of 8 total)
Author Posts
Author Posts
August 2, 2013 at 22:46 #6611

Conche
Participant

I am interested in buying / having constructed a pair of beaching legs for ‘Conche’.
Has anyone any design / measurements /photos /experience of legs for a Nic 38?

Rob

August 3, 2013 at 17:02 #13901
Jean Clair
Jean Clair
Participant

Hi Rob,
Jean Clair has a pair of beaching legs. Will photograph and measure
and get back to you.
Kind Regards
Alan

August 3, 2013 at 17:48 #13911

Conche
Participant

Thanks, Alan. That’s great, Rob

August 4, 2013 at 14:57 #13931
Jean Clair
Jean Clair
Participant

Hi Bob,
My beaching legs are made from 10cm diameter aluminium extrusion with cast aluminium foot and head.

The foot is 22cm square with 4 triangular flanges on each corner to support the 10cm deep socket for the tube. The head
as you can tell from the photo has a flat face which fits flush
to the hull side (a rubber mat/washer seperates the head from the hull)
The bolt hole is centraly positioned 5cm from the top.

The overall length of the feet is 230cm.

Hope that helps if you require any further info please
let me know.

Kind Regards
Alan





August 4, 2013 at 15:02 #13941
Jean Clair
Jean Clair
Participant

Hi Bob,
forgot to say that the head is 20cm tall and the flat face is 12.5cm wide.

Kind Regards
Alan

August 4, 2013 at 22:15 #13951

Conche
Participant

Hi Alan,
Thank you very much for the photos and measurements.
Just a few questions…
To clarify, you say the overall length is 230cm and the hull bolt hole is 5cm from the top, so am I correct in thinking the distance from the bolt hole to the underside of the feet is 225cm?
Do you know what diameter and thread the moulded bolt hole in the hull is?
Have you used these? Did they work ok?
Kind Regards,
Rob

August 5, 2013 at 12:50 #13961
Jean Clair
Jean Clair
Participant

Hi Rob, (got it right at last)
Yes the length of the legs are 225cm from the centre of the bolt hole to the
bottom of the leg. The bolts are on board and I’m at home at the moment but will
Be able to give you the info on Wednesday when I’m next down there.
Kind Regards
Alan

August 5, 2013 at 21:42 #13971

Conche
Participant

Hi Alan,
That would be great.
Thanks,
Rob

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.